DVSA Tell Me Questions
-
The brakes should feel firm and resistant and NOT spongy or slack. The vehicle should not pull to one side under braking.
-
You should use a reliable pressure gauge and check tyres when they are cold. You can find the tyre pressure information in the vehicle’s handbook.
-
If your vehicle has an adjustable head restraint then it should be adjusted so that the head restraint is close to the back of the head. The head restraint should also be adjusted so that it is as high as the eyes or top of the ears.
-
The tyre must have a tread depth of at least 1.6mm across the central three-quarters of the breadth of the tyre and around the entire circumference of the tyre. The tyre must not have any cuts or bulges.
-
Explain how you would operate the headlight switch and tell the examiner you would walk around the vehicle checking the front and rear. You do not have to physically check as this is a tell me question.
-
The ABS warning should appear when turning the ignition and then disappear after a few seconds. If the light stays on or appears when driving then this indicates a fault with the ABS system.
-
Explain you would operate the switch and then walk around the vehicle checking all the direction indicators are working. You do not have to physically check as this is a tell me question.
-
Explain you would apply the brake pedal and ask somebody to check the lights at the rear of the vehicle. If you had to check on your own, you would use reflections preferably at night.
-
As you start the engine you would apply gentle pressure to the steering wheel, you should notice a slight movement as the power steering begins to work. The steering wheel should now be light and easy to move. If the wheel remains or becomes heavy this could indicate an issue with the power steering.
-
Turn the ignition and turn on the dipped headlights first and operate the switch for the rear fog light, check the light is illuminated. You can use fog lights when visibility is reduced to 100 metres or less.
-
You would switch on dipped headlights first, followed by operating the main beam (usually found on the indicator stalk). A blue light should appear on the dashboard.
-
Locate the oil level dipstick and explain you would remove this and wipe it clean with cloth (only when the engine is cold or you would risk serious burns). You would now re insert the dipstick and then remove it again checking the oil is between the minimum and maximum markers.
-
Locate the coolant (usually a pink liquid) and check the fluid is in between the minimum and maximum indicators.
-
Locate the brake fluid and check the level is in between the minimum and maximum indicators.